I bought the 1 TB-Elemente (WDBAAU0010HBK-VEVEY, Switzerland) for use with a dish DVR-622. The installation is truly Plug-and-play. Out of the box, put it in and was immediately recognized by the DVR. Transferred about 200 GB of content to it and I was content directly on the disc. So far, works perfectly. Stops automatically after a few minutes of time and if the DVR is disconnected. Tower also return automatically (less than 10 seconds) when the DVR takes. One thing that some people do not have as it can: the case is flat (as in the photo), ne sitting next to step. There are four pads small landslide on the corners at the bottom, but not one in each side. No indication in the area, in the documentation, or on the Western Digital Web site, if the drive does not work on the edge. As a general rule, WD drives are designed to operate the side or even upside down (all X, Y, Z direction), so this time we should probably also-offer, but your non-slip pad. Compatibility issues with some devices cause several similar drives by Western Digital, as the latest model of my series of books now include a partition on hard to remove hard drive info registry the CD firmware and you can. This partition contains the backup software and utilities, which are of dubious value in each case and without value, if the machine with a device (for example, the dish DVR). Available - at least not at the time of this garbage, including China. (Note: WD must eliminate a downloadable program for the partition of the other units, but if you want this crap then save time and effort and buy only the elements with.). . .